TAG-PROTECT-6 · Protective Cap for TC2030 Cables
€5.00
- From 1 pcs: €5.00 / pc
Available, delivery time: 1-3 days
More than 5 in stock
Product information "TAG-PROTECT-6 · Protective Cap for TC2030 Cables"
Short description
Protective cap for the 6-pin TC2030 cable family (Plug-of-Nails™). Protects spring contacts, steel guide pins and — where present — retention tabs during storage and transport.
Application
If a TC2030 cable is sitting idle between programming sessions, the TAG-PROTECT-6 shields the delicate spring contacts and guide pins from bending, dirt and short circuits from loose metal parts nearby.
Technical data
- Fits: TC2030 cable family (6-pin, Plug-of-Nails™)
- Function: mechanical protection for spring contacts, steel guide pins and retention tabs when not in use
Variants
TAG-PROTECT-10 (for the 10-pin TC2050 family) · TAG-PROTECT-14 (for the 14-pin TC2070 family)
Included
The protective cap only. Any cable/accessory shown in product photos is not included — the photos illustrate an application example only.
Accessories
Connects a 6-pin Plug-of-Nails™ target (legged) to a 10-pin 2.54 mm (0.1″) IDC socket, for select Altera USB Blaster/ByteBlaster programmers.
- from 1 pcs €65.00
Connects a 6-pin Plug-of-Nails™ target (no legs) to a 10-pin 2.54 mm (0.1″) IDC socket, for select Altera USB Blaster/ByteBlaster programmers.
- from 1 pcs €65.00
6-pin TC2030 Plug-of-Nails™ cable, legged, for ARM Cortex targets. 10-pin ribbon connector on 1.27 mm (0.05″) in FTSH-105 format (Cortex Debug standard, e.g. Keil ULINK2).
- from 1 pcs €45.00
6-pin TC2030 cable with legs and a 20-pin 1.27 mm connector — for debuggers with the ARM Cortex Debug+ETM port: IAR I-Jet, Keil ULINK Pro, SEGGER J-Trace. Electrically identical to the TC2030-CTX; only the debugger-side connector differs.
- from 1 pcs €55.00
6-pin TC2030 cable without legs and with a 20-pin 1.27 mm connector for IAR I-Jet, Keil ULINK Pro and SEGGER J-Trace. For boards that should not get leg holes, and for connections that last longer than one programming cycle.
- from 1 pcs €55.00
6-pin TC2030-NL Plug-of-Nails™ programming cable, no legs, for ARM Cortex targets. 10-pin ribbon connector on 1.27 mm (0.05″) in FTSH-105 format, saves over 66% board area versus classic FTSH-105 micro-headers.
- from 1 pcs €45.00
6-pin TC2030-NL Plug-of-Nails™ cable, no legs, for ARM Cortex targets — with the 10-pin 1.27 mm (0.05″) ribbon connector fitted reversed at the factory, specifically for Atmel-ICE.
- from 1 pcs €50.00
6-pin TC2030-NL cable, no legs, for STM32 targets with STLINK-V3/STLINK-V3MINI. 14-pin ribbon connector on 1.27 mm (0.05″) in STDC14 (FTSH-107) format, carries SWD including the SWO signal.
- from 1 pcs €42.00
6-pin TC2030 cable, legged, for STM32 targets with STLINK-V3/STLINK-V3MINI. 14-pin ribbon connector on 1.27 mm (0.05″) in STDC14 (FTSH-107) format, carries SWD including the SWO signal.
- from 1 pcs €42.00
FTDI TTL-232R-3V3 USB-to-serial cable fitted with a TC2030 6-pin legged Tag- Connector. USB-A plug at the other end. No mating connector needed on the target board.
- from 1 pcs €99.00
FTDI TTL-232RG-VIP USB-to-serial cable fitted with a TC2030 6-pin legged Tag- Connector. USB-A plug at the other end. No mating connector needed on the target board.
- from 1 pcs €99.00
6-pin Plug-of-Nails™ cable, legged, with a 6-pin 2.54 mm (0.1″) ribbon connector to the host. Snaps directly into a tiny PCB footprint — no mating connector needed on the target board.
- from 1 pcs €35.00
- from 20 pcs €32.20
- from 30 pcs €31.50
Like TC2030-IDC — six contacts on the board, 6-pin 2.54 mm (0.1″) connector at the debugger — but 254 mm (10″) instead of the standard length — for extra distance between debugger and target board.
- from 1 pcs €35.00
- from 20 pcs €32.20
- from 30 pcs €31.50
6-pin Plug-of-Nails™ cable, no legs, with a 6-pin 2.54 mm (0.1″) ribbon connector. Footprint about the size of an 0805 SMT resistor.
- from 1 pcs €35.00
- from 20 pcs €32.20
- from 30 pcs €31.50
Like TC2030-IDC-NL — six contacts on the board, 6-pin 2.54 mm (0.1″) connector at the debugger — but 254 mm (10″) instead of the standard length.
- from 1 pcs €35.00
Connects a 6-pin Plug-of-Nails™ target (legged) via an RJ12 modular connector to a Microchip ICD programmer.
- from 1 pcs €50.00
Like TC2030-MCP — six contacts on the board, RJ12 modular plug at the programmer — but 254 mm (10″) instead of the standard length.
- from 1 pcs €50.00
- from 20 pcs €46.00
- from 30 pcs €45.00
Connects a 6-pin Plug-of-Nails™ target (no legs) via an RJ12 modular connector to a Microchip ICD programmer. Footprint barely bigger than an SMT resistor.
- from 1 pcs €50.00
Like TC2030-MCP-NL — six contacts on the board, RJ12 modular plug at the programmer — but 254 mm (10″) instead of the standard length.
- from 1 pcs €50.00
Connects a 6-pin Plug-of-Nails™ target (legged) to Microchip's PICkit 3/4/5, via a 6-pin 2.54 mm (0.1″) SIP header.
- from 1 pcs €48.00
Connects a 6-pin Plug-of-Nails™ target (no legs) to Microchip's PICkit 3/4/5 — through a single-row 6-pin header on 2.54 mm (0.1″). Footprint barely bigger than an SMT resistor.
- from 1 pcs €48.00
Related products
Protective cap for the 10-pin TC2050 cable family (Plug-of-Nails™). Protects spring contacts, steel guide pins and — where present — retention tabs during storage and transport.
- from 1 pcs €5.00
Protective cap for the 14-pin TC2070 cable family (Plug-of-Nails™). Protects spring contacts, steel guide pins and — where present — retention tabs during storage and transport.
- from 1 pcs €5.00