TAG-PROTECT-10 · Protective Cap for TC2050 Cables
€5.00
- From 1 pcs: €5.00 / pc
Available, delivery time: 1-3 days
More than 5 in stock
Product information "TAG-PROTECT-10 · Protective Cap for TC2050 Cables"
Short description
Protective cap for the 10-pin TC2050 cable family (Plug-of-Nails™). Protects spring contacts, steel guide pins and — where present — retention tabs during storage and transport.
Application
If a TC2050 cable is sitting idle between programming sessions, the TAG-PROTECT-10 shields the delicate spring contacts and guide pins from bending, dirt and short circuits from loose metal parts nearby.
Technical data
- Fits: TC2050 cable family (10-pin, Plug-of-Nails™)
- Function: mechanical protection for spring contacts, steel guide pins and retention tabs when not in use
Variants
TAG-PROTECT-6 (for the 6-pin TC2030 family) · TAG-PROTECT-14 (for the 14-pin TC2070 family)
Included
The protective cap only. Any cable/accessory shown in product photos is not included — the photos illustrate an application example only.
Accessories
Everything you need to try the Tag-Connect approach on your own board: cable, adapter to the 20-pin ARM header, both retainers, protective cap and a demo board with the footprints to hold in your hand — in a storage case. Put together so that nothing is missing and nothing is doubled.
- from 1 pcs €79.00
Ten-pin debug and programming cable with spring pins that lands straight on the board — no connector on the target, just ten contact pads and six holes. The four legs hold it there while you work. At the other end, a standard 2.54 mm (0.1″) ribbon header that fits nearly every debugger.
- from 1 pcs €40.00
- from 20 pcs €36.80
- from 30 pcs €36.00
10-pin Plug-of-Nails™ cable (legged) to 1.27 mm (0.05″) pitch ribbon, for ULINK2 and similar debuggers with Samtec FTSH-105-01 style micro-headers. All 10 pins connected (unlike the standard TC2050-IDC-050, which leaves pins 5/9 open for ARM compatibility).
- from 1 pcs €65.00
- from 20 pcs €59.80
- from 30 pcs €58.50
10-contact legged programming cable for TI's MSP-FET430 debugger and its 14-pin 2.54 mm (0.1″) connector, compatible with all MSP430 microcontrollers — direct contact with no mating connector needed on the target board.
- from 1 pcs €50.00
Ten-pin debug and programming cable with spring pins, without legs — the smallest debug access a board can have: ten contact pads and three holes, nothing else. At the other end a standard 2.54 mm (0.1″) ribbon header.
- from 1 pcs €38.00
- from 3 pcs €37.00
- from 5 pcs €36.00
Like TC2050-IDC-NL-050, but with all 10 pins connected instead of leaving pins 5/9 open. No legs, for ULINK2 and similar debuggers with Samtec FTSH-105-01 style micro-headers on 1.27 mm (0.05″).
- from 1 pcs €65.00
- from 20 pcs €59.80
- from 30 pcs €58.50
10-pin Plug-of-Nails™ cable, no legs, with a 14-pin 1.27 mm (0.05″) ribbon connector in STDC14 format for STLINK-V3/STLINK-V3MINI.
- from 1 pcs €66.00
10-contact spring-pin cable, no Legs, for TI's MSP-FET430 debugger and its 14-pin 2.54 mm (0.1″) connector, compatible with all MSP430 microcontrollers.
- from 1 pcs €50.00
Related products
Protective cap for the 6-pin TC2030 cable family (Plug-of-Nails™). Protects spring contacts, steel guide pins and — where present — retention tabs during storage and transport.
- from 1 pcs €5.00
Protective cap for the 14-pin TC2070 cable family (Plug-of-Nails™). Protects spring contacts, steel guide pins and — where present — retention tabs during storage and transport.
- from 1 pcs €5.00