TI MSP430

New

Both ends of the ECV3-14-2AP-IDC cable side by side: on the left the 14-pin Edge-Connect™ connector for the board edge, on the right the 14-pin IDC connector on a 2.54 mm pitch.

ECV3-14-2AP-IDC · 14-pin Edge-Connect to 2.54 mm (0.1″) IDC

14-pin Edge-Connect™ with two guide pins, terminating in a **2.54 mm (0.1″) IDC header** — the classic ribbon connector on a 2.54 mm pitch.

€92.00

from 1 pcs €92.00

Example of use: the TC2050-IDC-430 connecting a TI MSP-FET430 to a target board. Only the cable is supplied.

TC2050-IDC-430 · Cable for TI MSP-FET430

10-contact legged programming cable for TI's MSP-FET430 debugger and its 14-pin 2.54 mm (0.1″) connector, compatible with all MSP430 microcontrollers — direct contact with no mating connector needed on the target board.

€50.00

from 1 pcs €50.00

The connector head without legs pressed onto the footprint of a circuit board by hand; a coin beside it shows the scale. Only the cable is supplied.

TC2050-IDC-NL-430 · Cable for TI MSP-FET430

10-contact spring-pin cable, no Legs, for TI's MSP-FET430 debugger and its 14-pin 2.54 mm (0.1″) connector, compatible with all MSP430 microcontrollers.

€50.00

from 1 pcs €50.00

The TC2070-IDC cable in full length, with the 14-pin Tag-Connect connector with spring pins and legs at one end and the 14-pin IDC connector on a 2.54 mm pitch at the other.

TC2070-IDC · 14-Pin Debug Cable, Legged

14-pin Plug-of-Nails™ cable, legged, terminating in a 14-pin (2×7) 2.54 mm (0.1″) ribbon connector.

€65.00

from 1 pcs €65.00

The TC2070-IDC-NL cable in full length, with the 14-pin Tag-Connect connector with spring pins, no legs at one end and the 14-pin IDC connector on a 2.54 mm pitch at the other.

TC2070-IDC-NL · 14-Pin Cable, No Legs

14-pin Plug-of-Nails™ cable, no legs, terminating in a 2.54 mm (0.1″) IDC ribbon connector (2×7 pin).

€65.00

from 1 pcs €65.00