TC2070-IDC-NL · 14-Pin Cable, No Legs
€65.00
- From 1 pcs: €65.00 / pc
- From 20 pcs: €59.80 / pc
- From 30 pcs: €58.50 / pc
Available, delivery time: 1-3 days
Only 5 left in stock
Product information "TC2070-IDC-NL · 14-Pin Cable, No Legs"
Short description
14-pin Plug-of-Nails™ cable, no legs, terminating in a 2.54 mm (0.1″) IDC ribbon connector (2×7 pin).
Connections
| Side | Pins | Connector | Pitch |
|---|---|---|---|
| Board (Tag-Connect) | 14 | Footprint TC2070, no Legs | 1.27 mm (0.05″) |
| Debugger | 14 | Socket, 2 × 7 | 2.54 mm (0.1″) |
Pin assignment: contact n is on connector pin n — the cable is wired straight through.
Compatible: debuggers with a 14-pin 2.54 mm pin header.
Not, or not directly, compatible
- 14-pin, 2 × 7, 1.27 mm (0.05″): TC2070-IDC-NL-050
Technical data
- Connector spacing: 2.54 mm (0.1″) (standard IDC)
- Cable length: approx. 200 mm (8″)
- Version: no legs
In use with these devices
ST-Link V3 SET (ST STM8, SWIM) · PEmicro Multilink Universal/FX (NXP) · PEmicro Cyclone LC/FX Universal (NXP) · TI MSP-FET430 (MSP430, JTAG/BSL/SPY-BI-WIRE)
What counts is the connector, not the device name: compare the connector on your device with the table above. If it carries a different one, the route goes through an adapter board.
Variants
TC2070-IDC — legged. TC2030-IDC-NL — 6-pin variant. TC2030-MCP-NL — 6-pin with RJ12 for Microchip.
| Bauform: | IDC-Kabelende, NL (No Legs) |
|---|
Manufacturer's datasheet (PDF, copy hosted by us)
Accessories
Protective cap for the 14-pin TC2070 cable family (Plug-of-Nails™). Protects spring contacts, steel guide pins and — where present — retention tabs during storage and transport.
- from 1 pcs €5.00
- from 20 pcs €4.60
- from 30 pcs €4.50
Holds a TC2070-NL cable against the target board — 3-pack.
- from 1 pcs €14.00
- from 20 pcs €12.88
- from 30 pcs €12.60
Demo board carrying every Tag-Connect footprint size, for comparison before laying out your own board — 6-, 10- and 14-pin, each with and without legs, plus the EC-10 Edge-Connect™ footprint.
- from 1 pcs €2.00
- from 20 pcs €1.84
- from 30 pcs €1.80
Related products
14-pin Plug-of-Nails™ cable, legged, terminating in a 14-pin (2×7) 2.54 mm (0.1″) ribbon connector.
- from 1 pcs €65.00
- from 20 pcs €59.80
- from 30 pcs €58.50
14-pin Plug-of-Nails™ cable with legs, terminating in a **1.27 mm (0.05″) pitch** connector — the slim variant for debuggers with a fine IDC header.
- from 1 pcs €68.00
14-pin Plug-of-Nails™ cable without legs and with a 14-pin 1.27 mm (0.05″) IDC connector — all 14 pins connected. Plugs straight into the STDC14 port of ST-LINK V3, V3SET and V3MINI and brings the ST-LINK's Virtual COM Port to the board alongside SWD and JTAG.
- from 1 pcs €68.00
14-pin Edge-Connect™ with two guide pins, terminating in a **2.54 mm (0.1″) IDC header** — the classic ribbon connector on a 2.54 mm pitch.
- from 1 pcs €92.00
10-contact legged programming cable for TI's MSP-FET430 debugger and its 14-pin 2.54 mm (0.1″) connector, compatible with all MSP430 microcontrollers — direct contact with no mating connector needed on the target board.
- from 1 pcs €50.00
- from 20 pcs €46.00
- from 30 pcs €45.00
10-contact spring-pin cable, no Legs, for TI's MSP-FET430 debugger and its 14-pin 2.54 mm (0.1″) connector, compatible with all MSP430 microcontrollers.
- from 1 pcs €50.00
- from 20 pcs €46.00
- from 30 pcs €45.00
Hersteller: Tag-Connect, LLC, 433 Airport Blvd, Suite 323, Burlingame, CA 94010, USA. Tel. +1 877-244-4156 · support@tag-connect.com
Verantwortliche Person in der EU (Art. 19 GPSR, da Hersteller ohne EU-Niederlassung):
Collion GmbH & Co.KG
Am Schmiedlacker 56, D-84028 Landshut
Tel. +49 (871) 2066-1000 · info@collion.de