TC2030-CTX-20-NL · Cortex-20 Cable, No Legs, with Clip
€55.00
- From 1 pcs: €55.00 / pc
- From 20 pcs: €50.60 / pc
- From 30 pcs: €49.50 / pc
Available, delivery time: 1-3 days
Only 3 left in stock
Product information "TC2030-CTX-20-NL · Cortex-20 Cable, No Legs, with Clip"
Short description
6-pin TC2030 cable without legs and with a 20-pin 1.27 mm connector for IAR I-Jet, Keil ULINK Pro and SEGGER J-Trace. For boards that should not get leg holes, and for connections that last longer than one programming cycle.
Connections
| Side | Pins | Connector | Pitch |
|---|---|---|---|
| Board (Tag-Connect) | 6 | Footprint TC2030, no Legs | 1.27 mm (0.05″) |
| Debugger | 20 | Socket Cortex-20, Debug+ETM, 2 × 10 | 1.27 mm (0.05″) |
Full pin assignment: in the "Technical data" tab.
Compatible: IAR I-Jet and I-Jet Trace, Keil ULINK Pro, SEGGER J-Trace — the 20-pin 1.27 mm Cortex connector carrying the trace signals.
Not, or not directly, compatible
- 10-pin, 2 × 5, 1.27 mm (0.05″) — Cortex connector, e.g. Keil ULINK2: TC2030-CTX-NL
- 10-pin, 2 × 5, 2.54 mm (0.1″) — e.g. PEmicro Multilink, USB-Blaster: TC2030-ALT-NL
- 14-pin, 2 × 7, 1.27 mm (0.05″) — STDC14, e.g. ST-LINK V3: TC2030-CTX-NL-STDC14
- 6-pin, 2 × 3, 2.54 mm (0.1″): TC2030-IDC-NL
- 6-pin, single row, 2.54 mm (0.1″) — Microchip PICkit 3/4/5: TC2030-PKT-NL
- RJ12 socket (6P6C) — Microchip ICD 3, ICD 4, PICkit 3, PM3: TC2030-MCP-NL
Easily confused: The classic 20-pin ARM connector has the same pin count at twice the pitch.
No legs — what for
The TC2030-NL footprint needs only six contact pads and three holes for the alignment pins — no extra latch holes for the legs. It is the smallest debug access Tag-Connect offers, and it fits on boards where the legged footprint has no room.
Without legs, the cable does not hold itself. For a lasting connection — desk development, endurance testing, production — there is the TC2030-CLIP-3PACK clip that grips the three alignment pins from the underside of the board and holds the cable. For a quick programming pass by hand, a thumb is enough.
The connector on the debugger
20 pins at 1.27 mm pitch — the Cortex Debug+ETM port of I-Jet, ULINK Pro and J-Trace. Not the classic 20-pin JTAG at 2.54 mm (standard J-Link). What the cable carries and what it doesn't is explained on the TC2030-CTX-20.
Technical data
- Signals: SWDIO, SWCLK, SWO, nRESET, VCC, GND
- Debuggers: IAR I-Jet / I-Jet Trace, Keil ULINK Pro, SEGGER J-Trace, J-Link with 19-pin adapter
- Clip: TC2030-CLIP-3PACK (separate)
Included
The cable only. Debugger, clip and demo board are not included.
| Bauform: | NL (No Legs) |
|---|
Manufacturer's datasheet (PDF, copy hosted by us)
Pin assignment
| Cortex-20 | Signal | TC2030 |
|---|---|---|
| 1 | VCC | 1 |
| 2 | SWDIO / TMS | 2 |
| 3 | GND | 5 |
| 4 | SWCLK / TCK | 4 |
| 5 | GND | 5 |
| 6 | SWO / TDO | 6 |
| 9 | GNDDetect | 5 |
| 10 | nRESET | 3 |
Not connected: 7, 8 and 11 to 20 (trace signals).
On pins 1 to 10 the 20-pin Cortex connector carries the same signal set as the 10-pin one; pins 11 to 20 are the trace signals, which a six-contact footprint cannot carry.
Pin assignment as specified by the manufacturer.
Accessories
Protective cap for the 6-pin TC2030 cable family (Plug-of-Nails™). Protects spring contacts, steel guide pins and — where present — retention tabs during storage and transport.
- from 1 pcs €5.00
- from 20 pcs €4.60
- from 30 pcs €4.50
Temporarily holds a TC2030-NL cable in place on the target board — for hands-free debugging where board space is tight. 3-pack.
- from 1 pcs €22.00
- from 20 pcs €20.24
- from 30 pcs €19.80
Holds a TC2030-NL cable permanently against the target board — 3-pack.
- from 1 pcs €14.00
- from 20 pcs €12.88
- from 30 pcs €12.60
Demo board carrying every Tag-Connect footprint size, for comparison before laying out your own board — 6-, 10- and 14-pin, each with and without legs, plus the EC-10 Edge-Connect™ footprint.
- from 1 pcs €2.00
- from 20 pcs €1.84
- from 30 pcs €1.80
Related products
6-pin TC2030 Plug-of-Nails™ cable, legged, for ARM Cortex targets. 10-pin ribbon connector on 1.27 mm (0.05″) in FTSH-105 format (Cortex Debug standard, e.g. Keil ULINK2).
- from 1 pcs €50.00
- from 20 pcs €46.00
- from 30 pcs €45.00
6-pin TC2030-NL Plug-of-Nails™ programming cable, no legs, for ARM Cortex targets. 10-pin ribbon connector on 1.27 mm (0.05″) in FTSH-105 format, saves over 66% board area versus classic FTSH-105 micro-headers.
- from 1 pcs €50.00
- from 20 pcs €46.00
- from 30 pcs €45.00
6-pin TC2030-NL Plug-of-Nails™ cable, no legs, for ARM Cortex targets — with the 10-pin 1.27 mm (0.05″) ribbon connector fitted reversed at the factory, specifically for Atmel-ICE.
- from 1 pcs €50.00
- from 20 pcs €46.00
- from 30 pcs €45.00
6-pin TC2030 cable with legs and a 20-pin 1.27 mm connector — for debuggers with the ARM Cortex Debug+ETM port: IAR I-Jet, Keil ULINK Pro, SEGGER J-Trace. Electrically identical to the TC2030-CTX; only the debugger-side connector differs.
- from 1 pcs €55.00
- from 20 pcs €50.60
- from 30 pcs €49.50
6-pin TC2030 cable, legged, for STM32 targets with STLINK-V3/STLINK-V3MINI. 14-pin ribbon connector on 1.27 mm (0.05″) in STDC14 (FTSH-107) format, carries SWD including the SWO signal.
- from 1 pcs €50.00
- from 20 pcs €46.00
- from 30 pcs €45.00
6-pin TC2030-NL cable, no legs, for STM32 targets with STLINK-V3/STLINK-V3MINI. 14-pin ribbon connector on 1.27 mm (0.05″) in STDC14 (FTSH-107) format, carries SWD including the SWO signal.
- from 1 pcs €50.00
- from 20 pcs €46.00
- from 30 pcs €45.00
Edge-Connect™ cable with a 10-pin ECV3 board-edge connector, terminating in a 20-pin 1.27 mm (0.05″) ribbon connector. Fits ULINK2 and similar debuggers using Samtec FTSH-110-01 style micro-headers.
- from 1 pcs €88.00
14-pin Edge-Connect™ with two guide pins, terminating in the **20-pin Cortex-20 header on 1.27 mm (0.05″)** and carrying the trace signals.
- from 1 pcs €92.00
Hersteller: Tag-Connect, LLC, 433 Airport Blvd, Suite 323, Burlingame, CA 94010, USA. Tel. +1 877-244-4156 · support@tag-connect.com
Verantwortliche Person in der EU (Art. 19 GPSR, da Hersteller ohne EU-Niederlassung):
Collion GmbH & Co.KG
Am Schmiedlacker 56, D-84028 Landshut
Tel. +49 (871) 2066-1000 · info@collion.de