TC2030-CLIP-3PACK – Retaining Clip for TC2030-NL, 3-Pack
€22.00
- From 1 pcs: €22.00 / pc
- From 20 pcs: €20.24 / pc
- From 30 pcs: €19.80 / pc
Available, delivery time: 1-3 days
More than 5 in stock
Product information "TC2030-CLIP-3PACK – Retaining Clip for TC2030-NL, 3-Pack"
Short description
Temporarily holds a TC2030-NL cable in place on the target board — for hands-free debugging where board space is tight. 3-pack.
Application
Intended for temporary fixation, not as a permanent mount. Because of its small size, Tag-Connect recommends keeping spare clips on hand. If you need a sturdier, permanent solution, use the legged cable variant (TC2030-IDC instead of TC2030-IDC-NL) instead.
Technical data
- Quantity per pack: 3
- Compatibility: TC2030-NL cables (No-Legs variants)
Accessories
Connects a 6-pin Plug-of-Nails™ target (no legs) via an RJ12 modular connector to a Microchip ICD programmer. Footprint barely bigger than an SMT resistor.
- from 1 pcs €50.00
- from 20 pcs €46.00
- from 30 pcs €45.00
Like TC2030-MCP-NL, but 10″ instead of the standard length.
- from 1 pcs €50.00
- from 20 pcs €46.00
- from 30 pcs €45.00
Protective cap for the 6-pin TC2030 cable family (Plug-of-Nails™). Protects spring contacts, steel guide pins and — where present — retention tabs during storage and transport.
- from 1 pcs €3.00
- from 20 pcs €2.76
- from 30 pcs €2.70
Programming cable for ARM Cortex targets with a 0.05″ (1.27 mm) pitch 20-pin connector, for IAR's I-Jet and Keil's ULINK Pro debuggers.
- from 1 pcs €55.00
- from 20 pcs €50.60
- from 30 pcs €49.50
Like TC2030-IDC-NL, but 10″ (254 mm) instead of the standard length.
- from 1 pcs €40.00
- from 20 pcs €36.80
- from 30 pcs €36.00
6-pin TC2030-NL cable, no legs, for STM32 targets with STLINK-V3/STLINK-V3MINI. 14-pin ribbon connector in STDC14 (FTSH-107) format, carries SWD including the SWO signal.
- from 1 pcs €50.00
- from 20 pcs €46.00
- from 30 pcs €45.00
6-pin TC2030 cable, legged, for STM32 targets with STLINK-V3/STLINK-V3MINI. 14-pin ribbon connector in STDC14 (FTSH-107) format, carries SWD including the SWO signal.
- from 1 pcs €50.00
- from 20 pcs €46.00
- from 30 pcs €45.00
6-pin TC2030-NL Plug-of-Nails™ cable, no legs, for ARM Cortex targets — with the 10-pin ribbon connector fitted reversed at the factory, specifically for Atmel-ICE.
- from 1 pcs €50.00
- from 20 pcs €46.00
- from 30 pcs €45.00
6-pin TC2030-NL Plug-of-Nails™ programming cable, no legs, for ARM Cortex targets. 10-pin ribbon connector in FTSH-105 format, saves over 66% board area versus classic FTSH-105 micro-headers.
- from 1 pcs €50.00
- from 20 pcs €46.00
- from 30 pcs €45.00
Connects a 6-pin Plug-of-Nails™ target (no legs) to Microchip's PICkit 3/4/5. Footprint barely bigger than an SMT resistor.
- from 1 pcs €48.00
- from 20 pcs €44.16
- from 30 pcs €43.20
Hersteller: Tag-Connect, LLC, 433 Airport Blvd, Suite 323, Burlingame, CA 94010, USA. Tel. +1 877-244-4156 · support@tag-connect.com
Verantwortliche Person in der EU (Art. 19 GPSR, da Hersteller ohne EU-Niederlassung):
Collion GmbH & Co.KG
Am Schmiedlacker 56, D-84028 Landshut
Tel. +49 (871) 2066-1000 · info@collion.de