EC-DEMOPCB-V3 · Demo board with Edge-Connect footprints
€2.00
- From 1 pcs: €2.00 / pc
- From 20 pcs: €1.84 / pc
- From 30 pcs: €1.80 / pc
Available, delivery time: 1-3 days
More than 5 in stock
Product information "EC-DEMOPCB-V3 · Demo board with Edge-Connect footprints"
Short description
A small board carrying the Edge-Connect™ footprints at full size — to handle, measure and try out before you commit the pattern to your own layout. The V3 denotes the third generation of the Edge-Connect series — the same one the ECV3 cables belong to.
What it is for
Edge-Connect places the contacts on the edge of the board rather than on its surface. That saves room, but it asks for an edge held to close tolerances — and whether your own layout got it right usually only shows on the first fabricated board.
This demo board removes that round trip: plug your cable on, see how the contact seats, and keep a physical reference on the desk while you draw the pattern.
Application
- check the footprints before your first own layout
- judge how the cable seats and how firmly it holds
- keep as a reference while the layout takes shape
- show the team what Edge-Connect actually is
Included
The demo board only. Cables and adapters are ordered separately.
Matching cables
The ECV3 family — ECV3-06-IDC, ECV3-10-IDC and the 1.27 mm (0.05″) variants.
Accessories
Edge-Connect™ cable with six contacts at the board edge, terminating in the **ARM Cortex debug connector** — the 10-pin 1.27 mm (0.05″) header carried by Keil ULINK2 and most Cortex debuggers.
- from 1 pcs €85.00
- from 20 pcs €78.20
- from 30 pcs €76.50
Edge-Connect™ cable with six contacts at the board edge, terminating in the **STDC14 header** — the 14-pin connector on ST's STLINK-V3 and STLINK-V3MINI debuggers.
- from 1 pcs €85.00
- from 20 pcs €78.20
- from 30 pcs €76.50
Edge-Connect™ connector for direct board-edge contact — no mating connector on the target board, just one locating hole. Terminates in a 6-pin 2.54 mm (0.1″) IDC ribbon connector.
- from 1 pcs €85.00
- from 20 pcs €78.20
- from 30 pcs €76.50
Third-generation Edge-Connect™ connector for direct board-edge contact, terminating in a 10-pin 2.54 mm (0.1″) IDC ribbon connector. No mating connector on the target board — just one locating hole, and a low profile suited to stacked boards.
- from 1 pcs €88.00
- from 20 pcs €80.96
- from 30 pcs €79.20
Edge-Connect™ board-edge connector, terminating in a 10-pin 1.27 mm (0.05″) IDC ribbon connector. Fits debuggers with Samtec FTSH-105-01 style micro-headers (e.g. ULINK2).
- from 1 pcs €88.00
- from 20 pcs €80.96
- from 30 pcs €79.20
Edge-Connect™ cable with a 10-pin ECV3 board-edge connector, terminating in a 20-pin 1.27 mm (0.05″) ribbon connector. Fits ULINK2 and similar debuggers using Samtec FTSH-110-01 style micro-headers.
- from 1 pcs €88.00
- from 20 pcs €80.96
- from 30 pcs €79.20
Edge-Connect™ cable with ten contacts at the board edge, terminating in the **STDC14 header** — the 14-pin connector on ST's STLINK-V3 and STLINK-V3MINI debuggers. Carries JTAG **and** SWD.
- from 1 pcs €88.00
- from 20 pcs €80.96
- from 30 pcs €79.20
14-pin Edge-Connect™ with two guide pins, terminating in the **20-pin Cortex-20 header** and carrying the trace signals.
- from 1 pcs €92.00
- from 20 pcs €84.64
- from 30 pcs €82.80
14-pin Edge-Connect™ with two guide pins, terminating in a **2.54 mm (0.1″) IDC header** — the classic ribbon connector on a 2.54 mm pitch.
- from 1 pcs €92.00
- from 20 pcs €84.64
- from 30 pcs €82.80
14-pin Edge-Connect™ with two guide pins, terminating in a **1.27 mm (0.05″) IDC header** — the narrow ribbon connector on a 1.27 mm pitch.
- from 1 pcs €92.00
- from 20 pcs €84.64
- from 30 pcs €82.80
14-pin Edge-Connect™ with two guide pins, terminating in a **2 mm IDC header** — the pitch between 1.27 mm (0.05″) and 2.54 mm (0.1″).
- from 1 pcs €92.00
- from 20 pcs €84.64
- from 30 pcs €82.80
Related products
Demo board carrying every Tag-Connect footprint size, for comparison before laying out your own board — 6-, 10- and 14-pin, each with and without legs, plus the EC-10 Edge-Connect footprint.
- from 1 pcs €0.80
- from 20 pcs €0.74
- from 30 pcs €0.72
Hersteller: Tag-Connect, LLC, 433 Airport Blvd, Suite 323, Burlingame, CA 94010, USA. Tel. +1 877-244-4156 · support@tag-connect.com
Verantwortliche Person in der EU (Art. 19 GPSR, da Hersteller ohne EU-Niederlassung):
Collion GmbH & Co.KG
Am Schmiedlacker 56, D-84028 Landshut
Tel. +49 (871) 2066-1000 · info@collion.de