ECV3-10-IDC-050 · 10-Pin Edge-Connect™ to 1.27 mm (0.05″) IDC
€88.00
- From 1 pcs: €88.00 / pc
Available, delivery time: 1-3 days
Only 2 left in stock
Product information "ECV3-10-IDC-050 · 10-Pin Edge-Connect™ to 1.27 mm (0.05″) IDC"
Short description
Edge-Connect™ board-edge connector, terminating in a 10-pin 1.27 mm (0.05″) IDC ribbon connector. Fits debuggers with Samtec FTSH-105-01 style micro-headers (e.g. ULINK2).
Connections
| Side | Pins | Connector | Pitch |
|---|---|---|---|
| Board (Tag-Connect) | 10 | Edge contacts ECV3-10 (Edge-Connect™) | 1.27 mm (0.05″) |
| Debugger | 10 | Socket, 2 × 5 | 1.27 mm (0.05″) |
Pin assignment: contact n is on connector pin n — the cable is wired straight through.
Compatible: debuggers with a 10-pin 1.27 mm pin header.
Not, or not directly, compatible
- 10-pin, 2 × 5, 2.54 mm (0.1″) — e.g. PEmicro Multilink, USB-Blaster: ECV3-10-IDC
- 14-pin, 2 × 7, 1.27 mm (0.05″) — STDC14, e.g. ST-LINK V3: ECV3-10-IDC-STDC14
- 20-pin, 2 × 10, 1.27 mm (0.05″) — e.g. Keil ULINK2: ECV3-10-IDC-050-20
Easily confused: The 10-pin 2.54 mm box header has the same pin count at twice the pitch.
Technical data
- All 10 pins wired 1:1
- Available in standard orientation or LEMTA variant (reversed connector, for Atmel-ICE compatibility)
In use with these devices
Atmel ICE (AVR via JTAG/SPI/PDI/debugWIRE) · Atmel ICE (SAM/ARM via JTAG/SWD) · Cortex-10/MIPI-10 generic debuggers · Cypress Miniprog 3 & 4
What counts is the connector, not the device name: compare the connector on your device with the table above. If it carries a different one, the route goes through an adapter board.
Included
Ribbon cable and IDC connector. Not included: demo PCB.
Variants
ECV3-10-IDC — same function with standard 2.54 mm (0.1″) IDC instead of 1.27 mm (0.05″).
| Bauform: | ECV3 Edge Connector, IDC-Kabelende |
|---|
Datasheet with our advisory note (PDF — manufacturer's drawing with a note from us in front)
Accessories
A small board carrying the Edge-Connect™ footprints at full size — to handle, measure and try out before you commit the pattern to your own layout. The V3 denotes the third generation of the Edge-Connect series — the same one the ECV3 cables belong to.
- from 1 pcs €2.00
- from 20 pcs €1.84
- from 30 pcs €1.80
Related products
Third-generation Edge-Connect™ connector for direct board-edge contact, terminating in a 10-pin 2.54 mm (0.1″) IDC ribbon connector. No mating connector on the target board — just one locating hole, and a low profile suited to stacked boards.
- from 1 pcs €88.00
- from 20 pcs €80.96
- from 30 pcs €79.20
Edge-Connect™ cable with a 10-pin ECV3 board-edge connector, terminating in a 20-pin 1.27 mm (0.05″) ribbon connector. Fits ULINK2 and similar debuggers using Samtec FTSH-110-01 style micro-headers.
- from 1 pcs €88.00
Edge-Connect™ cable with ten contacts at the board edge, terminating in the
- from 1 pcs €88.00
6-pin TC2030 Plug-of-Nails™ cable, legged, for ARM Cortex targets. 10-pin ribbon connector on 1.27 mm (0.05″) in FTSH-105 format (Cortex Debug standard, e.g. Keil ULINK2).
- from 1 pcs €50.00
- from 20 pcs €46.00
- from 30 pcs €45.00
6-pin TC2030-NL Plug-of-Nails™ programming cable, no legs, for ARM Cortex targets. 10-pin ribbon connector on 1.27 mm (0.05″) in FTSH-105 format, saves over 66% board area versus classic FTSH-105 micro-headers.
- from 1 pcs €50.00
- from 20 pcs €46.00
- from 30 pcs €45.00
6-pin TC2030-NL Plug-of-Nails™ cable, no legs, for ARM Cortex targets — with the 10-pin 1.27 mm (0.05″) ribbon connector fitted reversed at the factory, specifically for Atmel-ICE.
- from 1 pcs €50.00
- from 20 pcs €46.00
- from 30 pcs €45.00
Edge-Connect™ cable with six contacts at the board edge, terminating in the **ARM Cortex debug connector** — the 10-pin 1.27 mm (0.05″) header carried by Keil ULINK2 and most Cortex debuggers.
- from 1 pcs €85.00
10-pin Plug-of-Nails™ cable (legged) to 1.27 mm (0.05″) pitch ribbon, for ULINK2 and similar debuggers with Samtec FTSH-105-01 style micro-headers. All 10 pins connected (unlike the standard TC2050-IDC-050, which leaves pins 5/9 open for ARM compatibility).
- from 1 pcs €65.00
- from 20 pcs €59.80
- from 30 pcs €58.50
Hersteller: Tag-Connect, LLC, 433 Airport Blvd, Suite 323, Burlingame, CA 94010, USA. Tel. +1 877-244-4156 · support@tag-connect.com
Verantwortliche Person in der EU (Art. 19 GPSR, da Hersteller ohne EU-Niederlassung):
Collion GmbH & Co.KG
Am Schmiedlacker 56, D-84028 Landshut
Tel. +49 (871) 2066-1000 · info@collion.de