TC-RENESAS · Adapter for Renesas E1/E2/E8a/E20
€35.00
- From 1 pcs: €35.00 / pc
Available in 7 days, delivery time 1-3 days
Product information "TC-RENESAS · Adapter for Renesas E1/E2/E8a/E20"
Short description
Connects a TC2030-IDC (6-pin) or TC2050-IDC (10-pin) cable to Renesas E1, E2, E2 Lite, E8a or E20 emulators/debuggers — through their 14-pin 2.54 mm (0.1″) connector.
Connections
| Side | Pins | Connector | Pitch |
|---|---|---|---|
| Debugger | 14 | Socket Renesas E1 / E2 / E2 Lite / E8a / E20, 2 × 7 | 2.54 mm (0.1″) |
| Cable (Tag-Connect) | 6 | Pin header, 2 × 3 | 2.54 mm (0.1″) |
| Cable (Tag-Connect) | 10 | Pin header, 2 × 5 | 2.54 mm (0.1″) |
Pin assignment: not published by the manufacturer. Ask us if you need it for your layout.
Compatible: Renesas E1, E2, E2 Lite, E8a and E20.
Not, or not directly, compatible
- 14-pin, 2 × 7, 2 mm — Xilinx Platform Cable II: through the adapter board TC2050-XILINX
- 20-pin, 2 × 10, 2.54 mm (0.1″) — ARM connector, e.g. SEGGER J-Link, Keil ULINK, ST-LINK/V2: through the adapter board COLL-ARM20-06-IDC, COLL-ARM20-10-IDC, ARM20-CTX, TC2050-ARM2010
- 12-pin — Lattice HW-USBN-2B: through the adapter board TC-LATTICE
Technical data
- Fits any Renesas emulator/debugger with a standard 14-pin connector
In use with these devices
Renesas E1 · Renesas E2 · Renesas E2 Lite · Renesas E8a · Renesas E20
What counts is the connector, not the device name: compare the connector on your device with the table above. If it carries a different one, the route goes through an adapter board.
Included
Adapter only (debugger shown in product photos is for illustration only).
| Bauform: | IDC-Kabelende |
|---|
Manufacturer's datasheet (PDF, copy hosted by us)
Accessories
Edge-Connect™ connector for direct board-edge contact — no mating connector on the target board, just one locating hole. Terminates in a 6-pin 2.54 mm (0.1″) IDC ribbon connector.
- from 1 pcs €85.00
6-pin Plug-of-Nails™ cable, legged, with a 6-pin 2.54 mm (0.1″) ribbon connector to the host. Snaps directly into a tiny PCB footprint — no mating connector needed on the target board.
- from 1 pcs €35.00
- from 20 pcs €32.20
- from 30 pcs €31.50
Like TC2030-IDC — six contacts on the board, 6-pin 2.54 mm (0.1″) connector at the debugger — but 254 mm (10″) instead of the standard length — for extra distance between debugger and target board.
- from 1 pcs €35.00
- from 20 pcs €32.20
- from 30 pcs €31.50
6-pin Plug-of-Nails™ cable, no legs, with a 6-pin 2.54 mm (0.1″) ribbon connector. Footprint about the size of an 0805 SMT resistor.
- from 1 pcs €35.00
- from 20 pcs €32.20
- from 30 pcs €31.50
Like TC2030-IDC-NL — six contacts on the board, 6-pin 2.54 mm (0.1″) connector at the debugger — but 254 mm (10″) instead of the standard length.
- from 1 pcs €35.00
Related products
Adapter from the 12-pin connector of the Lattice HW-USBN-2B programming cable to a 10-pin 2.54 mm (0.1″) pin header for TC2050-IDC, TC2050-IDC-NL and ECV3-10-IDC cables — with DONE, PROGRAMN/ispEN, TRST and 5 V. The adapter for iCE40 and for any configuration that needs more than four JTAG lines.
- from 1 pcs €40.00
Hersteller: Tag-Connect, LLC, 433 Airport Blvd, Suite 323, Burlingame, CA 94010, USA. Tel. +1 877-244-4156 · support@tag-connect.com
Verantwortliche Person in der EU (Art. 19 GPSR, da Hersteller ohne EU-Niederlassung):
Collion GmbH & Co.KG
Am Schmiedlacker 56, D-84028 Landshut
Tel. +49 (871) 2066-1000 · info@collion.de